Pesticides luminescent sensing by a Tb3+-doped Zn metal-organic framework with selectivity towards parathion.

Organophosphorus pesticides (OPPs) such as parathion have extensive uses in agriculture and household applications. Chronic exposure to these pesticides can cause severe health and environmental issues. Therefore, a current ecological concern is associated with accumulating these noxious OPPs in food and water sources. In this work, a new Tb3+-doped Zn-LMOF (Zn-LMOF= (3D) {[Zn3(1,4 benzenedicarboxylate)3(EtOH)2]·(EtOH)0.6}∞) was synthesized by a solvent-free reaction between the Zn-LMOF and the salt TbCl3·6H2O using a high-speed ball milling. The Tb@Zn-LMOF was thoroughly characterized by multiple spectroscopic tools, including Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy, and studied in-depth as a luminescent sensor for a series of pesticides (parathion, malathion, methalaxil, carbofuran, iprodione, captan and glyphosate) in aqueous methanol. The Tb@Zn-LMOF is a long-lived green-emitting compound with luminescence originated by an efficient antenna effect from the excited energy levels of Zn-LMOF toward the 5D state of Tb3+ ions, as it is displayed by its strong emission bands at 488, 545, 585, and 620 nm and a lifetime of 1.01 ms upon excitation at 290 nm. Additions of pesticides to a neutral methanolic dispersion of Tb@Zn-LMOF modified its green emission intensity with a pronounced selectivity toward parathion within the micromolar concentration range. The detection limit for parathion was calculated to be 3.04 ± 0.2 µM for Tb@Zn-LMOF. Based on 31P NMR and mass spectrometry studies, it is attributed to the release of lanthanide ions from Tb@Zn-LMOF with the simultaneous formation of a Tb3+-parathion complex.

Low-cost sugarcane bagasse and peanut shell magnetic-composites applied in the removal of carbofuran and iprodione pesticides.

In the present study, two agro-industrial wastes, sugarcane bagasse, and peanut shell were employed as support of magnetite nanoparticles for the synthesis of magnetic bio-composites: magnetic sugarcane bagasse (MBO) and magnetic peanut shell (MPSo). The presence of magnetite was verified by Raman spectroscopy. Magnetic nanoparticles shape and size distribution were studied by TEM, while composites morphologies were observed by SEM. Structural characteristics of the pesticides and their possible chemical adsorption on composites were analyzed by FTIR. The removal was carried out by a batch adsorption process, and UV-VIS technique was used for pesticide concentration estimation. Elovich model described better all systems pointing out to a chemical adsorption process occurring. Experimental data isotherms of carbofuran and iprodione can be best explained by more than one mathematical model, but Sip was the ordinary equation in all systems. Maximum adsorption capacities of 175 and 89.3 mg/g for carbofuran, and 119 and 2.76 mg/g for iprodione, were obtained for MBo and MPSo, respectively.

Influence of the chain length of surfactant in the modification of zeolites and clays. Removal of atrazine from water solutions.

Removal potentials of a surfactant modified zeolite (SMZ) and clay (SMC) for atrazine adsorption were evaluated. Materials were modified with hexadecyl trimethyl ammonium bromide (HDTMA-Br) and benzyl octadecyl dimethyl ammonium (BODA) chloride considering the critical micellar concentration (CMC) of each one (0.94 and 0.041 meq/L, respectively). The influence of the surfactant was analyzed in detail, particularly the formation of surfactant layers (complete or partial) connected with the length of the surfactant tail (16 and 18 methyl groups or number of carbons in the chain). Raw materials were characterized by XRD and Fourier transform infrared spectroscopy (FTIR), SMZ and SMC were analyzed by FTIR. Results obtained from kinetic adsorption experiments shown that equilibrium time is less for materials modified with HDTMA (8 h) than materials with BODA (10 and 12 h). Materials modified with the largest chain surfactant (BODA) showed more resistance to atrazine masse transference. The chemisorption was presented in the adsorption mechanisms of atrazine and adsorbent materials. Based on the results of adsorption isotherms Langmuir isotherms showed the better correlation coefficients value. The qmax is greater for materials modified with BODA (0.9232 and 4.2448 mg/g) than for materials modified with HDTMA (0.6731 and 3.9121 mg/g). Therefore, SMZ and SMC modified with the largest chain surfactant has more affinity for the pesticide. The removal process at high concentration of atrazine depends of the partition process but at lower concentration, it occurs not only by this process but also by absorption process.

Efficient fluoride removal using Al-Cu oxide nanoparticles supported on steel slag industrial waste solid.

A SSW/Al-Cu formed from an industrial solid waste and Al-Cu Nps are utilized for the removal of fluoride from aqueous solutions. The SSW/Al-Cu was obtained by a chemical reduction method. The SSW/Al-Cu was characterized by TEM, SEM, FT-IR, XRD, BET, and pHzpc techniques. The Nps were formed as bimetallic oxides and deposited in the form of spheroidal particles forming agglomerations. The sizes of these particles range from 1 to 3 nm. The surface area and average pore width of SSW/Al-Cu were 2.99 m2/g and 17.09 nm, respectively. The adsorption kinetics were better described using the second-order model, pointing to chemical adsorption with an equilibrium time of 540 min. The thermodynamic parameters obtained here confirm the spontaneous and endothermic nature of the process. The percentage of fluoride removal was 89.5% using the four-bladed disk turbine, and computational fluid dynamics (CFD) modeling demonstrated that using the four-bladed disk turbine helped improve the fluoride removal process. The maximum adsorption capacity was 3.99 mg/g. The Langmuir-Freundlich model best describes the adsorption process, which occurred by a combination of mechanisms, such as electrostatic interactions between the ions involved in the process. This study proves that the chemical modification of this waste solid created an efficient bimetallic nanomaterial for fluoride removal. Furthermore, the method of preparation of these nanocomposites is quite scalable.